INDUSTRIAL ELECTRICAL SERVICES IN Los Angeles
Servicing Southern California for 50 Years
For decades, PPS has designed and installed industrial power systems throughout Southern California and LA. Our experience with industrial facility power systems enables us to design and install a system that will meet your needs, whatever they are. Whether you're adding to an existing system, or planning a new facility from the ground up, we have the experience to provide the best system for your current and future needs.
We develop designs and perform installations for many industrial power systems, including:
-
“The service was excellent, the work performed was professional and the cost estimate met current prices.”
Douglas H. - Antelope Valley-East Kern Water Agency, a government project -
“I would highly recommend them for any commercial or industrial electrical needs”
Len Silvernail, CFM- Executive Director of Facilities and Engineering, Rusnak Group -
“We do not want any one else to service our facility.”
Mike B. -
“You and your staff are great to work with and the service you provide is second to none.”
Steve C. -
“We are thankful to partner with such wonderful people and businesses. We thank you for working with us, and we look forward to working together in the future.”
Juan
Trust Pro Power Services Inc. for Your Industrial Needs
Pro Power Services Inc. has an extremely high rate for client satisfaction. 95% of our clients return to our company for their electrical needs because of the quality service we are committed to offering. Combining more than five decades of experience with an adept and creative understanding of even the most complex electrical systems, we are confident in our ability to offer you the service and solutions you need for your industrial electrical projects.
Contact PPS or keep reading to learn more about the specific areas of industrial electrical work that we offer throughout Los Angeles.
Cold Storage Facilities
We have many years of experience in designing and building power systems and low voltage control systems for cold storage facilities. PPS is your best all-around value for resolving problems with your existing facility or designing a power system for a new facility in Los Angeles.
We install and troubleshoot power for:
- Compressors
- Air units
- Temperature sensors
- Freon sensors
- Cold storage lighting
- Automatic freezer doors
- Door heaters
50+ Years of Experience Working on Your Storage Facility
When you choose to work with Pro Power Services, you can be confident in the quality and reliability of the work we do on your cold storage facilities. If you have a cold storage facility, call us for sensible long-term solutions that can help you meet your needs.
Tool and Die Shops / Machine Shops
Throughout our decades of serving the LA business community, PPS has designed and installed countless machine shop power systems. We have extensive experience in designing, installing and troubleshooting all types of power systems.
Some power systems often necessary for machine-run shops that we can help troubleshoot, install or repair include:
- Machine centers
- Automatic saws
- Lathes
- Mills
- Screw machines
- Grinders
At Pro Power Services, we understand how important it is for your equipment to function properly. Even a slight malfunction can hinder the work flow you rely on to keep your business moving. Let our Los Angeles commercial electrical contractor work with you to find the quick and effective solution you need in order to keep your business running.
Grinding Shops
As one of LA's most trusted sources of industrial power system service and repair, PPS has designed and installed countless power systems for grinding shops. We use the experience we have gained from over 50 years in the business to provide the highest quality of service when designing, installing and troubleshooting your systems and equipment.
Some types of grinding equipment that we have experience in working with include:
- Blanchard Grinders
- Chuck Neutrofiers
- Double Disc Grinders
- Center-less Grinders
- Surface grinders
Food Processing & Bottling Facilities
Food process and Bottling facilities need to meet production targets. It's an industry where power is vital and downtime is expensive. Whether you're slicing potatoes by the bulk, shaping hamburger patties, bottling soft drinks or filling bottles with hair care products, PPS wants to be your partner in ensuring that your processes are as efficient and effective as possible.
We are here for you when you need to:
- Increase your power source
- Relocate your facility
- Power up more equipment,
- Troubleshoot line power or controls
- Troubleshoot optical sensors, encoders, counters or temperature controls.
In more than fifty years of serving the Los Angeles business community, PPS has designed and installed power systems for many food processing and bottling plants. We have the benefit of decades of experience designing, installing and troubleshooting these types power systems.
Plastics Extrusion/Vacu-Forming/Thermo-Forming Shops
Providing the Wattage Your Facility Requires
At PPS, we understand the importants of building a system that can sustain the power needs of Plastic Extrusion, Vacu-forming, and Thermo-forming. Because of the large motors and high wattage heating loads, these electrical systems need to be built in a way that can sustain the demands of these facilities. The modern industrial drives and heater controls distort the AC power systems wave form and cause excessive heating in system transformers, motors and other inductors due to harmonics.
We install power for and troubleshoot:
- Extrusion machines
- Vacu-forming machines
- Thermo-forming machines
- Temperature controls
- AC Drives
- DC Drives
- Overloads
Because we understand the special needs of these systems we are your best all-around value for resolving problems with your existing facility or designing a power system for a new facility. If you having problems with an existing system or would like to add more power call us for sensible long-term solutions that meet your needs.
Foam Fabrication Shops
Troubleshooting & Design Services
At PPS, our team of experienced electricians has extensive knowledge concerning the construction power systems for foam Cutting and fabrication shops. Because of the large motors, and high wattage heating loads, these electrical systems need to be built to deal with these demands. The modern industrial drives and heater controls that distort the AC power systems wave form and cause excessive heating in system transformers, motors and other inductors due to harmonics.
We have experience providing power for and troubleshooting:
- Polyurethane equipment
- Fecken-Kirfel vertical saws & horizontal slitters
- Fecken-Kirfel convoluters
- Edge-Sweets saws & slitters
- Expanded polystyrene equipment
- Hot wire slabbers & cubers
- Hot wire controls
- Hot wire down cutters
Because we understand the special needs of these systems, Pro Power Services Inc. is your best all-around value for resolving problems with your existing facility or designing a power system for a new facility in Los Angeles. If you having problems with an existing system or would like to add more power, let our team offer our experience and knowledge to help you find a solution that works.
Plating/Metalizing Facilities
Because of the harsh environment in plating and metalizing shops, there are special demands on the electrical systems and components that cause the facility to function. These systems can have excessive heat retention due to the distorted signal the equipment puts on the AC power systems. That excessive heating sits in system transformers, motors and other inductors due to harmonics. Because we understand the special needs of these systems, you can rely on PPS to resolve problems with your existing facility or designing a power system for a new facility that can handle the electrical demands in your field of work.
Pro Power Services Inc. can install power for and troubleshoot equipment used in plating and metalizing facilities, including:
- Rectifiers
- Tank heaters
- Pumps
- Transformers
- Overloads
With many years of experience designing and building power systems for Plating and Metalizing shops we understand the high demand that this equipment put on an industrial power system. Because of the rectifiers, and high wattage heating loads these electrical systems need to be built to deal with these demands. If you having problems with an existing system or would like to add more power to your plating and metalizing facility power system, contact Pro Power Services Inc. for a free on-site evaluation.
Other Production Facilities
If you have a production facility in or around Los Angeles, chances are your line of work demands special attention from an electrical contractor that can design a power system tailored to the specific needs of your industry. Pro Power Services Inc. works with virtually all industrial production facilities to carefully design, install and/or troubleshoot the power systems you rely on so heavily for your business's success. Save yourself from excessive expenses, unsafe environments and time costs by trusting an experienced electrical contractor from the very beginning.
At PPS we have decades of experience being a critical part of the solution to safe, productive and properly maintained plant electrical systems. At PPS we consider your electrical system your biggest production asset and deal with system problems by finding root causes and caring enough to recommend regular maintenance.
If you're considering expanding your facility, plant, or shop, call us for value-based, common-sense, and sustainable system designs and solutions. We are also able to troubleshoot reoccurring problems or electrical system downtime issues; PPS can help you resolve these counterproductive, attention consuming problems permanently.
Call our offices today at (323) 886-0103 to get started!
Since 1988, we have completed design/build projects of all types. We take pride in doing all parts of the project from conception to completion.
